Automatic Road Boom Barrier For Car Parking And Highway Toll
System , Vehicle Access Parking Barrier Gate
Functions & Features
1) Manual release
2) Machine core with compression spring, effectively avoids the
accidents caused by spring breaking
3) Die-casting aluminum alloy motor, precision and good at thermal
radiating
4) Motor cooling fan, solving the problem of heat-protection
5) Double safety limit switches (photoelectricity limit
switch/motor memory sensor)
6) Reversing on obstacle
7) Auto-closing
8) Support the INFRARER PHTOCELL for anti-bumping function
(optional)
9) Support the external and internal VEHICLE LOOP DETECTOR
(optional)
10) Traffic light interface
11) Wire control (switch signal)/ Remote control (418MHZ)
12) RS485 communication module (optional)
Technical Data
Mode (WJDZ): 102-11, 102-13, 102-16
Running time: 1s, 3s, 6s
Boom type: straight
Max Boom length: 3m, 4.5m, 6m
Boom dimension (WxH): 45x80mm
Boom weight: 3kg, 4.5kg, 6kg
Voltage: 220V ± 10%,110V ± 10%
Frequency: 50/60Hz
Motor voltage: 220V
Power: 120W
Working temperature: -20~75
Protection grade: IP54
Specification:
 | Rail material
| Aluminum Alloy |
Power supply
| AC220V±10%50 HZ AC110V±10%50 HZ/60 HZ |
Housing box material
| cold rolled mild steel/stainless steel |
Working temperature
| -40℃～85℃ |
size
| 340*280*1000 MM |
Rail length
| 1- 6 meter |
Motor speed
| 30 r/min |
| Control ways | push button/remote control/access
control system like charging
system or RFID card reader
|
| Housing color | orange / blue/ yellow / red
|
| MCBF | ≥5,000,000 times
|
Working environments
| indoor, outdoor
|
Relative humidity
| ≤90% no condensing |
Rated power
| 70 W/150 W |
Traffic light
| optional |
Bumping bounce back
| N/A |
Use & operation safety notes:
1. During arm going down, do not place anything under the booms; and
no body is allowed to standing or
walking under the boom.
2. Normally, do not adjust positions of mechanical limit switch or
photo electric limit switch.
3. When power cuts, first, turn off the power connection; then adjust
the boom to vertical position by
turning the manual swing manually.
4. Normally, users can not change the wire layout inside barrier
gate. Please just connect the gate with
220V power supply.
5. The power supply system should be equipped with leakage breaker
(≥10A).
6. Normally, do not increase or decrease the length or weight of the
boom, to avoid losing balance. If
necessary, professional staff is required.
7. During running, do not open the case-cover or case-door, to avoid
accident.
Characteristics:
1. Avoid vibrating caused by boom’s running;
2. Only 90 degree running for the boom, to avoid the accident of 360
degree running caused by abnormal
failures.
3. Special movement mechanism, with no gear or belt; no need for
maintenance; stable performance and
long life-span
4. Specially-designed balance mechanism, which makes boom start
slowly, run quickly and stop slowly.
5. Specially-designed low-speed aluminum-casing motor, integrated
gearbox with low noise & quick
heat-radiation;
6. Intelligent over- heat protection system for driving mechanism, to
control motor’s temperature and avoid
damaging easily during frequent usage.
Our service:
1. All items have 24 month quality guarantee.
2. Custom design shape and logo, for large amount, custom logo
available for free.
3. Supported by professional engineers.
4. Special discount of our distributors or agents in their area.
5. Packing in standard export carton, suggest you pack it by wooden
case to protect the products
6. CE, ROSH available.
7. Friendly and professional customer service people help you in 16
hours.
Project schemes:
1. Except the product, also offer the RFID card reader control system.
2. Only the boom barrier gate, you can use the button or remote controller to
control it.
3. We offer a complete set of the tolling parking system, including
barrier gate, ballot boxes, vehicle
detector,Entrance control system main board, System special
switching power supply, parking lot system
management software with dongle , etc.
Pictures
