Multiple Read Full Automatic Swing Barrier Gate 304 304 Stainless
Steel
Tchnical parameters
1 . Power : AC220C±10V,50HZ
2 . Operating temperature: -15°C--75°C
3 . Arm length: 60-90cm
4 . Passing Speed : 30~40 persons/min
5 . Motor: 0.5NM/24V(Fully Automatic)
6 . Input Connection: +12V Level Signal or Pulse Wide>100ms
DC12V
7 . Communication Connection: RS485 Communication Module Standard.
8 . Material: SUS304,thickness is no less than 1.3mm
9 . Protection Grade: IP54
10 . Operation Place: Subway Station, Hoverport,Tourism Sports,Exhibition, Swimming
Hall,Residence Area,Enterprise’s Entrance and Exit
Attendance,Gateway Guard,Charge Management,Special Access Control
Brief introduction of access control system
Our Turnstile can combine with different kinds of access
readers,like: RFID Reader&Fingerprint Reader &Coin
Machine&Barcode System&ESD Tester Access Control(If you
have access control system,you can only purchase our turnstiles,if
not, our side will install the access control system for
you),except acess system,also can use remote(this is free gift to
you
Features
1 . Problem-self-checking function.
2 . Many options of working ways: Bi-direction card reading; One
direction card reading and another no reading; One direction card
reading and another freely. And single direction photocell
controlled passing and close.
3 . When valid card read and passenger passed, arm can be delayed
to close from 1-60s which can be set in the control panel.
4 . Auto-reposition function: After card read, passenger not pass
within regulated time period, full-height turnstile will cancel
this passing right.
5 . When power off, arm open automatically and power on again, arm
will be held automatically.
6 . Flap barrier is with 485 interface for long-distrance control
concern.
7 . Anti-rush function: If there is no open single, arm will be
holding tightly.
8 . If passenger pass without card read or valid card read, flap
barrier will alarm untill passenger get back from the flap barrier
and then take a valid card to be read for passing.
Extendable functions
1 . Counter function (optional)
2 . The length of the cabinet (length 1.2m, 1.4m, or 1.6m are
optional)
3 . The material of flap arm (organic glass, resin, PVC etc.
optional)
4 . The color of the flap arm (red, blue, yellow, colorless, etc.)
Package
1 . Inside with a carton package.
2 . Outside,there are 2 kinds of packages under your choice: crate package and closed wooden package.
Ieading time
For standard item
10-50 sets:5 working days
50-100 sets:7-10 working days
200-500 sets:10-15 working days
For special item, or need custom design package or logo, need 3-10
working days longer
Payment terms
TT,western union,L/C,our company already joined the trade
assurance,it will highly protect your order security.
Transportation
For sample,normaly send by air or express,about 3-5 days
For quantity purchase,normally by sea, it normally takes 7-60 days
depend on different countries.
